1X2 Banda PM Fiber Mechanical Switch

Detail

1X2 Banda PM Fiber Mechanical Switch
Features:
　　　Low insertion loss
　　　Low Optical Distortions
　　　High Reliability
　　　Epoxy-Free Optical Path
　　　Low cost
Applications:
　　　Configurable Add/Drop
　　　System Monitoring
　　　Instrumentation

Specifications:

LB Series 1×2 (1310/1550) Switch	Min	Typical	Max	Unit
Operation Wavelength range	1310,1550			nm
Insertion Loss		<0.8	<0.90	dB
Min ER	18	20		dB
Wavelength Dependent Loss (WDL)		<0.25		dB
Channel Cross Talk	>55			dB
Return Loss	>55			dB
Repeatability			±0.03	dB
Switching Time			5	ms
Operating Current	20			mA
Operating Voltage	5.0			VDC
Durability	106			cycles
Optical Power Handing			500	mW
Operating Temperature	0		70	℃
Storage Temperature	-45		85	℃
Switch Type	Latching or Non-latching
Fiber Type	250um bare fiber or loose tube
Package Dimension	(L)43×(W)13.5×(H)11			mm

Notes:

1, Excluding Connectors

Optical Path	Electrical Drive				Status Sensor
Optical Path	Pin1	Pin5	Pin6	Pin10	Pin2-3	Pin3-4	Pin7-8	Pin8-9
1-2	+VPulse	GND	N/A	N/A	Open	close	close	open
1-3	N/A	N/A	GND	+VPulse	close	open	open	close

Ellectrical Drive (Non-Latching type)

Optical Path	Electrical Drive				Status Sensor
Optical Path	Pin1	Pin10	Pin5	Pin6	Pin2-3	Pin3-4	Pin7-8	Pin8-9
1-2	+VPulse	GND	N/A	N/A	Open	close	close	open
1-3	GND	+VPulse	N/A	N/A	close	open	open	close

Ordering Information:

   　　　　　　　　　　　      SMSW - XXXX –XX-XX--XX

　　　　　　　　　　　　　　　　　A    BC DE  FG

A	Wavelength	1310=1310nm
		1550=1550nm
		XX= Customized
B	Type	12=1×2
		00=Special
C	Port	D=Dual coil
		S=Single coil
		N=Non-latching
D	In/Out Fiber Type	1=250um Panda fiber
		2=400um Panda fiber
		3=900um
E	Fiber Length	1=0.5M
		2=1M
		3=1.5M
		X= Customized
FG	In/Out Connector	0=None
		1=FC/APC
		2=FC/PC
		3=SC/APC
		4=SC/PC
		5=ST
		6=LC

Detail